Serie LM Vertical mill

LM Series vertical mill is an advanced grinding machine, which integrated with drying , milling ,grading and transporting . It is the high standard mill which can meet the high capacity of powder producing request. LM vertical grinding mill is widely used in cement , powder station ,metallurgy ,chemical and non-metal industry .

1. Low invest cost
2. Low run cost
3. High drying ability
4. Easy to operate, reliable performance
5. Stable quality
6. Convenient to maintain
7. Environmental protection

Model		LM130K	LM150K	LM170K	LM190K	LM220K	LM240K
Turnplate diameter (mm)		1300	1500	1700	1900	2200	2400
Capacity (t/h)		10~30	13~40	18~57	23~72	36~114	41~128
Final product size	μm	170~45	170~45	170~45	170~45	170~45	170~45
Final product size	mesh	80~325	80~325	80~325	80~325	80~325	80~325
Final product water percentage		≤1%	≤1%	≤1%	≤1%	≤1%	≤1%
Max. input size (mm)		<38	<40	<42	<45	<50	<55
Best water percentage of raw material		<4%	<4%	<4%	<4%	<4%	<4%
Drying needed if water percentage is more than		<15%	<15%	<15%	<15%	<15%	<15%
Input wind temperature (℃)		<350	<350	<350	<350	<350	<350
Output wind temperature (℃)		70~95	70~95	70~95	70~95	70~95	70~95
Main motor power (KW)		185~220	250~280	355~400	450~500	710~800	800~900
Overall dimension	L mm	3500	4200	4700	8500	10200	11700
	W mm	3400	3900	4500	5600	6700	7700
	H mm	5800	7100	8300	8800	10600	12200
Weight (t)		48	75	90	100	125	160

Note: 1. Input material should be brittle material with Mohs hardness not more than seven.
2. Hot air is needed only when there is a requirement that water percentage of final product should be less than raw material.
3. If the material is hard to grind, motor power take large value.

LM Series Vertical Coal Mill Specification

Model		LM130M	LM150M	LM170M	LM190M	LM220M	LM240M
Turnplate diameter (mm)		1300	1500	1700	1900	2200	2400
Capacity (t/h)		10~15	16~22	20~28	26~35	35~45	40~50
Coal powder fineness (R0.08)		<15%	<15%	<15%	<15%	<15%	<15%
Coal powder water percentage		<1%	<1%	<1%	<1%	<1%	<1%
Max. input size (mm)		<38	<40	<42	<45	<50	<55
Input material water percentage		<15%	<15%	<15%	<15%	<15%	<15%
Input wind temperature (℃)		<350	<350	<350	<350	<350	<350
Output wind temperature (℃)		75~95	75~95	75~95	75~95	75~95	75~95
Raw coal Hardgrove grindability index (HGI)		>55	>55	>55	>55	>55	>55
Main motor power (KW)		185	250	315	400	500	560
Overall dimension	L mm	3500	4200	4700	8500	10200	11700
	W mm	3400	3900	4500	5600	6700	7700
	H mm	5800	7100	8300	8800	10600	12200
Weight (t)		46	75	94	100	122	157